Defrosting Your Cooler; Moving Your Cooler; Troubleshooting - NewAir AWC-330E Owner's Manual

DEFROSTING YOUR COOLER

This wine cooler is equipped with an auto-defrost function that will eliminate
the need to defrost the unit manually under most circumstances. If you notice
an excess of frost buildup inside the unit, take these steps to remove it:
1. Unplug the wine cooler.
2. Allow frost to melt from the inside of the cooler.
3. Dry thoroughly before plugging it in again.

MOVING YOUR COOLER

To move your cooler:

Remove anything stored inside.

Securely tape down all loose parts located inside the unit.

Turn the leveling feet up to the base in order to avoid damage.

Tape the door shut.

Be sure the cooler stays in an upright position during transportation.

TROUBLESHOOTING

Problem
Wine cooler does not
cool.
Wine cellar is not cold
enough.
9
Possible Causes
The unit may be plugged
in using a different
voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher setting.
The wine cooler may be
placed too close to a
heat source.
Love Your Home
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
or check for a broken
fuse
Lower the temperature
of the cooler.
Keep the wine cooler
away from direct sunlight
or other heat sources.