No Outdoor Data - Netatmo Weather Station User Manual

Direct CO2 reading
When measuring on demand, the indoor module display CO2 level using the following color code:
- Green = Good
- Yellow = Could be improved
- Red = Room should be ventilated.

No outdoor data?

No outdoor data?
Outdoor data are not displayed ?
I f your outdoor module data are not displayed in the Netatmo dashboard, although indoor measurements are
still visible, the link between the two modules might not be working. This may occur because of one of the
following reasons:
Reason 1: low on batteries
Check to outdoor module's batteries. When inserting batteries, the outdoor module should flash in green. If not
sure about your batteries still working, change them.
Reason 2: weakened radio signal
If the outdoor module is located too far away from the indoor module, or if both modules are separated by