Storage; Trouble Shooting Guide - Gastroback Vital Juicer Pro Operating Instructions Manual

Hide thumbs Also See for Vital Juicer Pro:
Table of Contents

Advertisement

sTorage

Always clean the appliance before storing (see ›Care and cleaning‹). Ensure to store the
appliance where it is clean, dry and safe from frost, unacceptable strain (mechanical or
electric shock, heat, moisture) and where it is out of reach of young children. Do noT
place any hard or heavy objects on the appliance.

Trouble shooTIng guIDe

On any problems occurring that are not mentioned here, please contact your authorised
service centre. To get more information about the appliance, contact Gastroback GmbH,
Gewerbestr. 20, D-21279 Hollenstedt (Germany), Phone: +49 (0) 4165 / 22 25-0.
The Problem
The motor will not work,
when switched ON.
The motor appears to stick or stall.
Excessive pulp building up in
the filter basket
The pulp is too wet and you get
an insufficient amount of juice
Juice leaks between the rim of the
juice collector and the juicer cover.
Juice sprays out from the spout.
Juice overflows the brim
of the motor base.
The easy solution
The appliance is possibly not assembled correctly.
Refer to ›Assembling the Juicer‹.
Immediately switch OFF the Juicer and unplug
from power outlet. Refer to ›Remove blockage‹.
Immediately switch OFF the Juicer and unplug
from power outlet. Refer to ›Remove blockage‹.
Try to work slower. Remove excess fibre building
up in the mesh and blocking the fine pores.
Remove the filter basket and brush out remaining
pulp under running water
(see ›Care and cleaning‹).
Try to work slower. Push the food pusher down
gently and slowly.
Try to work slower. Push the food pusher down
gently and slowly.
Immediately switch OFF and unplug the juicer.
Possibly the juice collector and/or spout is
blocked. Clean the juice collector (see ›Care
and cleaning‹).
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents