Comcast Inicio User Manual

1
Meet Your Remote
TV Power
Start
Remote with Aim Anywhere
XFINITY / Menu
Access Guide, Saved,
XFINITY On Demand, Apps,
Search and Settings.
Setup
Program remote for Aim
Anywhere or to control your
TV or audio device.
2
Turn On Your Remote
Your remote arrives with the AA batteries already installed,
Status LED
but not activated. Here is how to power it on for the first time.
All Power
A Pick up your remote and remove the "Pull" tab
(on back) by pulling away from the remote. The
Status LED will blink green four times as the
remote powers up (about 5 seconds).
Search
Discover content by
channel, program or key
Back
words.
B Turn on your TV.
C Turn on your set-top box.
Number Keys
Use predicitve text (T9) to
quickly search for content.
TV Input
Changes to the next
available input on your TV
(if programmed in Step 4)
3 4
Pair Remote for "Aim Anywhere" Control
Control your set-top box without having to point at it, even
when it is inside a cabinet or entertainment center.
A Press and hold the Setup button (about 3
seconds) until the Status LED changes from
red to green.
B Press the XFINITY button.
C Follow the on-screen instructions to enter the
3-digit code that appears.
Once the code is correctly entered, your
XFINITY Remote is paired with the device.
Not working? Make sure the battery tab from
your remote is removed, your TV is on and you are
entering the correct 3-digit code on your TV screen.
Need to remove Aim Anywhere control? Press
and hold the Setup button on the remote until the
status LED changes from red to green. Press A on
the remote. If the status LED blinks green twice,
you have successfully removed Aim Anywhere.
Control Your TV's Power and Volume
A Using the list on the right, find the first
5-digit code for your TV manufacturer.
Popular Manufacturer Codes
B Press and hold the Setup button (about 3
LG
seconds) until the Status LED changes from
red to green.
Panasonic
Samsung
Sanyo
C Enter in the first 5-digit code for your TV
manufacturer. The Status LED should blink
Sony
green twice.
Sharp
Toshiba
Vizio
D Verify that the code was accepted by using
your remote to adjust volume and turn the
If your code isn't listed or you
TV on and off.
would like to control an audio
device, visit xfinity.com/remotes.
Not working? Try the second code listed. Still
not working? Visit xfinity.com/remotes for a
complete list of manufacturer codes.
FCC Compliance Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not used in accordance with
the instructions, may cause harmful interference to radio
communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
10178, 11265
encouraged to try to correct the interference by one or more
of the following measures:
10051, 10250
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the
10812, 10060
equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
10154, 10159
• Consult the dealer or an experienced remote control/
TV technician for help.
• It is strongly recommended that the TV be plugged
10000, 11100
into a separate wall outlet.
The user is cautioned that changes and modifications made
10093, 10165
to this equipment without the approval of the manufacturer
could void the user's authority to operate this equipment.
10156, 11156
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
11758, 11756
accept any interference received, including interference that
may cause undesired operation.