Circuit Board C - ELNA 6004 Service Manual

Elna International Corps. SA
To remove
1. Remove the front panel (see page 4).
2. Loosen screws A, B, C and D, and remove set screw E and F.
3. Remove the rear cover.
4. Unplug the four (4) connectors and remove set screws G
5. Remove circuit board C
To attach
6. Attach the circuit board C with three (3) screws and insert the connectors
7. Attach the rear cover with six (6) set screws.
8. Attach the front panel unit (see page 4).
A = Circuit Board A
M = Machine socket (primary)
6004

CIRCUIT BOARD C

K = Transformer (primary)
0 = Transformer (secondary)
Page 18
Service manual