Troubleshooting; Maintenance And Cleaning; Maintenance And Service - Bosch AXT 22 D Original Instructions Manual

OBJ_BUCH-1015-001.book Page 21 Thursday, April 30, 2009 1:08 PM

Troubleshooting

The following chart lists problem symptoms, possible causes and corrective action, if your machine
does not operate properly. If these do not identify and correct the problem, contact your service
agent.
Warning! Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, dam-
aged or entangled.
Problem
Machine fails to operate
Machine beeps (also two lights
on AXT 23 TC/25 TC) and does
not start
One flashing light on
AXT 23 TC/25 TC
The material to be shredded is
not pulled in
Shredded material is not com-
pletely separated and hangs to-
gether as a chain

Maintenance and Service

Maintenance and Cleaning

Warning! Switch off, remove plug from
mains before adjusting, cleaning or if cable
is cut, damaged or entangled.
Bosch Power Tools
Possible Cause
Collection box not fitted cor-
rectly
Chute assembly not fitted cor-
rectly
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Collection box/chute is not cor-
rectly assembled
None, this is ok, machine is
"pluged in" and ready to use
Material to be shredded is wet
and soft
Jammed material in the ma-
chine
Pressure plate requires adjust-
ment
Always wear protective gloves when using,
adjusting or cleaning the machine.
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as
loose, dislodged or damaged blades, loose fix-
ings, and worn or damaged components.
English | 21
Corrective Action
Fit collection box correctly
Fit chute assembly correctly
Use another socket
Inspect cable, replace if dam-
aged
Replace fuse
Ensure the collection box is in
position
Ensure the chute assembly is in
position and clamped by turn-
ing the clamping knob (red) ful-
ly clockwise
Use the prodder to push the
material into the machine
Clear jammed material (always
wear gardening gloves)
Use the reverse button (see
"Return Motion")
see "Pressure Plate Adjust-
ment"
F 016 L70 603 | (30.4.09)