Professional Packs - Bosch Highflow 17e Quick Reference Manual

2.2

Professional Packs

Professional Packs are specifically designed for
commercial use. They are suitable for
applications that require a large volume of hot
water for peak demand. All Bosch Professional
Packs come with the following components –
Bosch hot water system, Bosch-Everlast
stainless steel storage tank, built-in
thermostat, shroud, PTR valve and pump. They
are pre-assembled, ready to be installed and
will be shipped directly to site. This means an
easy installation and low set-up costs.
The 315 litre Bosch-Everlast stainless steel
storage tank included in Bosch Professional
Packs comes standard with 32mm ports.
Bosch-Everlast stainless steel storage tanks
can also be purchased separately. A 315 litre
model with 32 mm ports (part number: 315C2)
as well as a 315 litre model with 50mm ports
(part number: 315C250) is available. The
315C250 storage tank is not available as part
of a Bosch Professional Pack.
Bosch Professional Packs come in the following system-tank combinations:
C31526ELP
Gas Type LP
Tank Size (ltr) 315
26e
System Size
Internal installation:
C31532WHLP and C31532WHNG may be installed internally
with appropriate flueing. Please consult AS 5601 or NZ 5621.
Model C31532WHNG
(with shroud)
Models
C31526ENG C31532WHLP
NG LP
315 315
26e 32
Model C31532WHNG
(without shroud; vent cap
KMVC100 as shown is a
required accessory for
external installations)
C31532WHNG
NG
315
32
15