OPTIMOD-FM 8200 V3.00 UPGRADE
8200 Software History
Version 3.00
•
Replaces the original factory "format" presets FB - FO with new format presets
FB- FV.
•
Adds new Multi-Band Control: High Frequency Coupling.
•
Removes EBS Test Mode.
Version 2.00
•
Multi-Band Controls
New controls include: Multi-Band Output Mix controls, Bass Clip
Threshold, and Phase Rotator In/Out. The range for the existing Final Clip
Drive has also been extended.
•
D-O Status Enable?
[Yes] or [No]
For 8200s equipped with the 8200 D/SRC, the 8200's controls now include a
switch that allows you to defeat Orban's special implementation of AES/EBU
status bits which are used to control Orban 8208 and 8218 Stereo Encoders.
This special implementation may be defeated to accommodate certain digital
STLs that misinterpret these status bits.
•
PC Security Enable
[On] or [Off]
When set to Off, password security is disabled, allowing access to 8200 via
remote PC, utilizing custom-developed software, and limited to recalling
presets only. When set to On, 8200 functions the same as under Version
1.2x, with full password security.
Version 1.20
•
8200PC Remote Control Software for Windows™
•
TIME TO SCREEN SAVER default setting is now 1:00 HRS. Removed Off
setting.
•
AGC IDLE GR (for Two-Band Normal, Two-Band Purist and Five-Band
processing) is now a value proportional to the AGC DRIVE, instead of a fixed
value of–10dB.
•
With Two-Band Normal, LF noise is no longer detectable at low drive levels.
•
For Five-Band processing, bass boost at low signal levels has been eliminated.
MANUAL ADDENDUM
I-11