Smart Electrician 3705414 User Instruction Manual

600w portable worklight with h-stand bas

Advertisement

WARRANTY
THREE YEAR LIMITED WARRANTY
If this product (excluding bulbs) fails due to a defect in materials or
workmanship within three (3) years from the date of purchase, return
it along with the proof of date of purchase to place of purchase and it
will be replaced with the same or comparable model free of charge.
This warranty gives you specific legal rights and you may have other
rights that vary from state to state. This warranty is void if damage or
defect has resulted from accident, abuse, misuse or faulty repair.
IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR
ANY CONSEQUENTIAL, SPECIAL INCIDENTAL OR INDIRECT
DAMAGES OF ANY KIND ARISING OUT OF THE USE OR
MISUSE OF THIS PRODUCT. SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CON-
SEQUENTIAL DAMAGES SO THE ABOVE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU.
For Warranty Service: Call 1 (888) 575-5272
Hours: 9 a.m.-5 p.m., PST, Monday- Friday.
Back
S
A
V
E
T
H
E
S
E
I
N
S
T
R
U
C
READ ALL INSTRUCTIONS!
CAUTION:
Read and understand all Safety and Operating
instructions in this manual before attempting to
assemble or use this product.
We're here to help. For assistance before returning to your retailer, call 1 (888) 575-5272.
Hours: 9 a.m.-5 p.m., PST, Monday- Friday.
3705414
Model
600W
Portable Worklight
with H-Stand Base
T
I
O
N
S
!
Tools Required:
Crosshead or "Phillips"
screwdriver
(not included)
Printed in China
Cover

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3705414 and is the answer not in the manual?

Questions and answers

Summary of Contents for Smart Electrician 3705414

  • Page 1 WARRANTY 3705414 Model THREE YEAR LIMITED WARRANTY 600W Portable Worklight If this product (excluding bulbs) fails due to a defect in materials or workmanship within three (3) years from the date of purchase, return with H-Stand Base it along with the proof of date of purchase to place of purchase and it will be replaced with the same or comparable model free of charge.
  • Page 2: Parts List

    PARTS LIST IMPORTANT SAFETY INSTRUCTIONS Understanding Hazard Signal Words: • Estimated Assembly Time: 10 minutes • Tools Required for Assembly: WARNING # 2 Phillips screwdriver (not included) indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation that, if not Fig.
  • Page 3 ASSEMBLY INSTRUCTIONS 5) The work light lamp head gets HOT very quickly. Only touch the power plug or cushioned handle when turning the lamp heads ON or WARNING: Risk of electrocution and severe burns. OFF. DO NOT plug in the work light before completing assembly. 6) Do not touch the glass lens, wire lens guard or any metal part of NEVER operate the light with the lens cover off and the the lamp head when lamp is turned on to avoid burns.
  • Page 4: Halogen Lamp Replacement

    HALOGEN LAMP INSTALLATION 2) Remove bulb (F) from its box and wrapper, being careful not to touch the bulb with your bare hands. Only use a clean cloth or tissue WARNING : RISK OF SEVERE BURNS. LAMP HEAD AND BULB to handle the bulb ARE EXTREMELY HOT DURING AND IMMEDIATELY AFTER USE.
  • Page 5: Worklight Operation

    WORKLIGHT OPERATION Power Switch • The lamp head has Two (2) ON–OFF style switches. See Fig. 9. Power supply cord and plug Always turn the lamp head OFF before unplugging the worklight! 4-ft. Your portable halogen worklight comes with a power supply Fig.
  • Page 6: Care And Maintenance

    CARE AND MAINTENANCE TROUBLE SHOOTING Your portable halogen work light requires very little care and Use below chart for troubleshooting your worklight. maintenance. Simply clean the lens, lamp head and lamp stand regularly with a non-abrasive cleaner. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION WARNING : Always make sure that work light is unplugged and...

Table of Contents