Wall Mounting - Panasonic KX-NT543 Quick Reference Manual

Wall Mounting

Wall Mounting
1
Insert the 5 tabs of the wall mounting adaptor into the designated
openings in the base, and then slide the wall mounting adaptor in
the direction of the arrow until it clicks.
2
Fasten the wall mounting adaptor to the base with 1 screw.
(Recommended torque: 0.4 N·m [4.08 kgf·cm] to 0.6 N·m
[6.12 kgf·cm])
3
Connect the cables to the unit, and run the cables through the wall
mounting adaptor, as shown in the illustration below.
4
Drive the 2 screws into the wall either 83 mm or 100 mm apart, and
mount the unit on the wall.
3
40 mm or less
AC adaptor
2
24
Ethernet cables
4
Washer
Drive the screw
to this point.
83 mm
100 mm