Panasonic KX-NT511 Quick Reference Manual

Panasonic KX-NT511 Quick Reference Manual

Ip proprietary telephone
Hide thumbs Also See for KX-NT511:

Advertisement

Thank you for purchasing an IP Proprietary Telephone (IP-PT). Please read this
manual carefully before using this product and save this manual for future use. For
more details, please refer to the manuals of the PBX.
This product supports the following PBX versions and CODEC
types:
R KX-NS300/KX-NS500: PFMPR Software File Version 1.0000 or later
R KX-NS1000: PCMPR Software File Version 3.0000 or later
R KX-NCP500/KX-NCP1000: PBMPR Software File Version 8.0000 or later
R KX-TDE100/KX-TDE200: PMMPR Software File Version 8.0000 or later
R KX-TDE600: PGMPR Software File Version 8.0000 or later
R CODEC: G.722, G.711, G.729A
*1
For KX-NT511, PCMPR Software File Version 3.0100 or later
Note
R In this manual, the suffix of each model number is omitted unless necessary.
R The illustrations may differ from the appearance of the actual product.
Trademarks
R Plantronics is a trademark or registered trademark of Plantronics, Inc.
R All other trademarks identified herein are the property of their respective owners.
KX-NT511/KX-NT551
Model No.
KX-NT553/KX-NT556

Quick Reference Guide

IP Proprietary Telephone
*1

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-NT511

  • Page 1: Quick Reference Guide

    R KX-TDE100/KX-TDE200: PMMPR Software File Version 8.0000 or later R KX-TDE600: PGMPR Software File Version 8.0000 or later R CODEC: G.722, G.711, G.729A For KX-NT511, PCMPR Software File Version 3.0100 or later Note R In this manual, the suffix of each model number is omitted unless necessary.
  • Page 2: Information For Users On Collection And Disposal Of Old Equipment And Used Batteries

    Important Information Important Information For Users in the European Union Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
  • Page 3: For Users In Australia And The United Kingdom

    Important Information Panasonic Testing Center Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany For Users in Australia and the United Kingdom R This unit is capable of being used in conjunction with hearing aids fitted with inductive coil pick-ups. The handset should be held as for normal conversation.
  • Page 4: Echo Cancellation

    Important Information Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services. The Use of IP Networks through the PSTN R Internet Protocol (IP) by its nature introduces delay into speech signals as each data packet is formulated and addressed.
  • Page 5: Accessory Information

    Accessory Information Accessory Information Included Accessories Handset (1) Handset Cord (1) AC adaptor Screws for wall mounting Stand (1) KX-NT511 KX-NT551 KX-NT553/KX-NT556 KX-NT511Axx only Part No.: PNLV226/PNLV226AG/PNLV226CE/PNLV226E/PNLV226LB/ PNLV226SX KX-NT511Axx/KX-NT511Pxx only...
  • Page 6: Optional Accessories

    Accessory Information Optional Accessories KX-NT511 KX-NT551 KX-NT553/ KX-NT556 KX-A239BX (PQLV206CE)/ KX-A239AL (PQLV206AL)/ KX-A239UK (PQLV206E)/ — AC adaptor KX-A239EJ (PQLV206E)/ KX-A239X (PQLV206)/ KX-A420BR (PSLP1662) — Wall mount kit KX-A432X KX-A433X — — Add-on 48 key module KX-NT505X To order an optional AC adaptor, please order using the "KX-A239xx/ KX-A420BR"...
  • Page 7: Location Of Controls

    Location of Controls Location of Controls KX-NT511 KX-NT551...
  • Page 8 Location of Controls KX-NT553 KX-NT556 A Main LCD (Liquid Crystal Display): KX-NT511/KX-NT551: 1 line, KX-NT553: 3 lines, KX-NT556: 6 lines B Message/Ringer Lamp When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on red.
  • Page 9 P SP-PHONE (Speakerphone): Used for performing hands-free operations. Q Microphone: Used for hands free conversations. R VOLUME (KX-NT511 only): Used to adjust the volume and the display contrast. Navigator Key (KX-NT551/KX-NT553/KX-NT556 only): Used to adjust the volume and the display contrast or select desired items.
  • Page 10 : Used to cancel the selected item. X NEXT PAGE : Used to switch the page for the Self Labeling feature. Y Sub LCD : 12 lines For KX-NT511, the lamp flashes red when receiving an intercom call. KX-NT551/KX-NT553/KX-NT556 only KX-NT553/KX-NT556 only...
  • Page 11: Volume/Lcd Contrast Settings

    If you hear your own voice through the handset or headset, decrease the volume. To change the sub LCD contrast of the KX-NT553/KX-NT556, enter Step 2. For KX-NT511, press and hold one of the flexible CO buttons for more than 2 seconds. For KX-NT551, press [PAUSE/PROGRAM]. For KX-NT511, press [CONF/STORE].
  • Page 12: Ring Tone

    : Always ON : Always OFF 5. Press [ENTER]. 6. Press [CANCEL]. For KX-NT511, press and hold one of the flexible CO buttons for more than 2 seconds. For KX-NT551, press [PAUSE/PROGRAM]. For KX-NT511, press [CONF/STORE]. For KX-NT551, press [AUTO DIAL/STORE].
  • Page 13: Making Calls

    Feature Operations Feature Operations Making Calls Calling MTo an extensionN 1. Go off-hook. 2. Dial an extension number. MTo an outside partyN 1. Go off-hook. 2. Press a flexible CO button. 3. Dial the outside party’s phone number. Redial 1. Go off-hook. 2.
  • Page 14: Personal Speed Dialing

    Enter the outside line access number before an outside phone number. For KX-NT551/KX-NT553/KX-NT556, you can also press [AUTO DIAL/ STORE]. For KX-NT511, press and hold one of the flexible CO buttons for more than 2 seconds. For KX-NT551, press [PAUSE/PROGRAM].
  • Page 15 Feature Operations For KX-NT511, go off-hook, and then go on-hook. For KX-NT551, press [PAUSE/PROGRAM].
  • Page 16: During A Conversation

    Feature Operations During a Conversation Call Hold MTo holdN 1. Press [HOLD]. 2. After the confirmation tone, go on-hook. MTo retrieve a call at the holding extensionN 1. Go off-hook. 2. Press a flexible CO button or [INTERCOM]. MTo retrieve an outside call from another extensionN 1.
  • Page 17: Do Not Disturb

    Feature Operations Setting the Telephone According to Your Needs Do Not Disturb 1. Go off-hook. 2. Enter 3. Press a dial key to select the setting. : Both outside and intercom calls : Outside calls only : Intercom calls only 4.
  • Page 18: Multiple Party Conversation

    4. Press [CONF]. 5. After the confirmation tone, talk with multiple parties. MTo leave a conferenceN 1. Press [CONF]. 2. After the confirmation tone, go on-hook. For KX-NT511, press [CONF/STORE]. Before Leaving Your Desk Call Forwarding 1. Go off-hook. 2. Enter 3.
  • Page 19: Self Labeling

    Feature Operations Self Labeling (KX-NT553/KX-NT556 only) The KX-NT553/KX-NT556 features 12 flexible buttons, with an LCD screen next to the buttons. Each item can be named on the LCD screen through personal or system programming to reflect the function of its corresponding flexible button. Additionally, the KX-NT553 (KX-NT556) flexible buttons can be organized into 2 (3) “pages”, allowing you to assign a total of 24 (36) items to the 12 flexible buttons.
  • Page 20: Attaching Kx-Nt505 To Kx-Nt553/Kx-Nt556

    Installation and Setup Installation and Setup Note R Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Attaching a KX-NT505 to the KX-NT553/KX-NT556 The KX-NT505 allows 48 additional flexible CO buttons to be added to this unit.
  • Page 21: Attaching The Stand

    AC adaptor must be connected to the second key module. If only 1 key module is connected, an AC adaptor is not required. R Use only the Panasonic AC adaptor. See “Optional Accessories”, Page 6. Attaching the Stand KX-NT511/KX-NT551 Insert the catches of the stand into the hooks located in the unit.
  • Page 22: Removing The Stand

    Installation and Setup Removing the Stand KX-NT511/KX-NT551 Remove the stand in the direction indicated while pushing the catches of the stand with both hands as shown. Example: KX-NT551 KX-NT553/KX-NT556/KX-NT505 Hold the stand with both hands. Gently rotate the stand in the direction indicated until it is released.
  • Page 23 Installation and Setup Connections KX-NT511 Ethernet cables To a Switching Hub To a PC Optional AC adaptor Clamp To a handset jack (handset) AC adaptor KX-NT551 Optional AC adaptor To a Switching Hub To a PC Ethernet cables To a handset jack...
  • Page 24 R When connecting a headset, the following headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.) – Wired headsets (KX-NT551/KX-NT553/KX-NT556 only) Panasonic RP-TCA400, RP-TCA430, KX-TCA400 or KX-TCA430 – EHS headsets (KX-NT553/KX-NT556 only) ®...
  • Page 25 Installation and Setup Connect the cables as shown in the following illustration. Incorrect Correct Ethernet cable Ethernet cable 60 mm or less R Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm in diameter or less. When connecting to a switching hub R If PoE is available, an AC adaptor is not needed.
  • Page 26: Wall Mounting

    R When mounting the KX-NT553/KX-NT556 with a KX-NT505 on a wall, only ONE KX-NT505 can be attached. R The KX-NT511 does not need a wall mounting adaptor. So when mounting it on the wall, proceed to Step 3. Insert the tabs of the wall mounting adaptor into the designated openings in the base, and then slide the wall mounting adaptor in the direction of the arrow until it clicks.
  • Page 27 [6.12 kgf·cm]) Connect the cables to the unit as shown in the illustration below. Drive the screws into the wall either 83 mm or 100 mm apart, and mount the unit on the wall. KX-NT511 Washer Drive the screw Ethernet cables to this point.
  • Page 28 Wall Mounting Example: KX-NT553/KX-NT556 with KX-NT505 Washer 40 mm or less Drive the screw AC adaptor Ethernet cables to this point. 83 mm 100 mm...
  • Page 29 Notes...
  • Page 30 Notes...
  • Page 31 Notes...
  • Page 32: Wall Mounting Template

    IP-PT and the 2 screws for the KX-NT505, as indicated above. This space is abbreviated in this template and must be measured. One screw at either point One screw at either point © Panasonic System Networks Co., Ltd. 2013 PNQX6352YA PP0913MK1113...

This manual is also suitable for:

Kx-nt551Kx-nt553Kx-nt556

Table of Contents