Recording With Automatic Synchronized Start; Manual Recording - Philips CDR785/00 Service Manual

EXTERNAL RECORDING
7 If a digital source is selected:

Recording with automatic synchronized start

After the recording process, the CD recorder stops
automatically.
Recording of an entire disc or a track with automatic
start
Note: Recordings from DAT or DCC will automatically stop
Important:
– Recording from CD-changers should always be started in
If an analogue source is selected:
the Auto-Start mode.
After the recording process, the CD recorder stops after a
– For recording from external CD changers do not use AUX
silence of 20 seconds on the source material.
MANUAL , but AUX TRACK or AUX CD .
• To stop recording manually, press STOP 9 on the set.
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
Important:
2 Press repeatedly AUX to select the input for the external
If you want to play the recorded CDR disc on any
source you want to record from.
regular CD player, it must first be finalised. See
AUX DIGITAL is displayed if the digital coaxial
finalising discs.
input is selected.
AUX OPTICAL is displayed if the digital optical input
Finalised CDRW discs play only on CDRW compatible
is selected.
CD players.
AUX ANALOG is displayed if the analogue input is
selected.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ¡ JOG CONTROL ™ to select either:
AUX CD ?: for recording with synchronised start of an
entire disc
AUX TRACK ?: for recording with synchronised start
of a track
5 Press YES to confirm your selection.
START SOURCE, AUX and the remaining recording
time of the CDR(W) are displayed.
Notes: If required the recording level can be set first, using
the REC LEVEL key. See "Rec Level key" under
"Recording General".
6 Start playback on the selected source.
The CD recorder starts to record simultaneously and
recording in progress is shown. The remaining recording
time left of the CDR(W) is displayed.
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
RECORD IN PROGRESS FINALIZE ALC
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track
or after 2.7 seconds of silence in analogue recordings.
26
after 20 seconds silence.
goes off.
RECORDING IN PROGRESS

Manual recording

Manual recording from an external source
Manual microphone recording
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
AUX DIGITAL is displayed if the digital coaxial
input is selected.
AUX OPTICAL is displayed if the digital optical input
1 Make sure that the CDR(W) is absolutely free of scratches
is selected.
and dust particles.
AUX ANALOG is displayed if the analogue input is
2 Set MIC LEVEL to the minimum level to prevent acoustic
selected.
feedback (e.g. a loud howling sound) before you connect the
3 Press REC TYPE on the set to enter into the recording menu.
microphone.
4 Rotate ¡ JOG CONTROL ™ to select the record type.
3 Connect a microphone to MIC.
AUX MANUAL ?: for manual start of recording
4 Press repeatedly AUX to select the input for the external
5 Press YES to confirm your selection.
source you wish to mix the microphone with.
WAIT is displayed.
RECORD ? , AUX and the remaining recording time of
the CDR(W) are displayed.
6 Start playback on the external source in order to set the
optimal recording level on the CD recorder (see "REC LEVEL
key").
5 Press REC TYPE on the set to enter into the recording menu.
7 Stop playback on the external source.
6 Rotate ¡ JOG CONTROL ™ to select the record type:
8 Go to the beginning of the desired track.
9 Press YES and simultaneously start playback on the external
source.
The CD recorder starts to record and recording in
7 Press YES to confirm your selection.
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
8 Set the optimal recording level on the CD recorder (see
"REC LEVEL key").
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT • In addition you can also set the optimal recording level of
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
the microphone by turning MIC LEVEL.
9 If AUX MIX MIC is selected:
Note: If CHECK INPUT is flashing, check the digital
Press YES and simultaneously start playback on the external
connection.
source.
10 Press STOP 9 on the set to stop recording.
UPDATE is displayed and goes
RECORDING IN PROGRESS
off.
EXTERNAL RECORDING
EDITING
RECORD REC LEVEL
BALANCE TEXT
PROG TRACK EDIT
CD CD
CDR
JOG CONTROL
COMPILE CD
REC TYPE
NO
AUX
YES
ERASE FINALIZE
AUX DIGITAL is displayed if the digital coaxial
input is selected.
AUX OPTICAL is displayed if the digital optical input
is selected.
AUX ANALOG is displayed if the analogue input is
selected.
AUX MIX MIC: the microphone is mixed to the
external source.
MIC ONLY: only the microphone is recorded.
WAIT is displayed.
RECORD ?, AUX and the remaining recording time of
the CDR(W) are displayed.
The CD recorder starts to record and recording in
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
STEP TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG DIGITAL
CD RW CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
27