Operation Procedure - Frigidaire MFM-6D Service Manual

OPERATION PROCEDURE

This section includes useful information about oven operation.
1
Plug power supply cord into a standard 3-
pronged 15 Amp, 120V AC 60Hz power outlet
socket.
2
After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The glass tray must always be in place during
cooking.
3
Shut the door. Make sure that it is firmly
closed.
4
When the oven door is opened, the light turn
off.
NOTE:
When the cooking time is up the time
pointer reads "0", you can hear the beep
and the heating stops. PLEASE NOTE
THAT THE TIMER CONTINUES FOR
THREE (3) MINUTES AFTER THE
COOKING STOPS.
reactivation of the refrigerator and
lengthens its useful life. Open the door
and take out the food (you need not wait
for the timer to stop to remove food). If
you wish to check the food before the end
of set time, simply open the door and the
oven will stop cooking. PLEASE NOTE
THAT THE TIMER DOES NOT STOP
when the door is open, but the oven does
stop cooking. When the door is closed,
the oven will
automatically. Cooking time can be reset
at any time during the cooking operation
by turning the timer knob. PLEASE NOTE
THAT THE REFRIGERATOR IS OFF
DURING THE MICROWAVE OVEN USE.
NOTE: Make sure the oven is properly installed and plugged into the electrical outlet.
7
This delays
resume cooking
5
The oven door can be opened at any time
during operation by touching the door release
button on the control panel. The oven will
automatically shut off. To restart the oven,
close the door and then touch START.
6
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
7
The display will show ": 0" when the oven is
plugged in.
8
Time clock returns to the present time when
the cooking time ends.
9
When the STOP/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information retained.
To erase all information (except the present
time), touch the STOP/CLEAR pad once
more. If the oven door is opened during the
oven operation, all information is retained.
10
If the START pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.