Creating Your Own Sound Effect - Sony MHC-GT660 Operating Instructions Manual

Creating your own
sound effect
You can raise or lower the levels of
specific frequency ranges, and then store
the setting as "USER" in the memory.
Use buttons on the unit to create your
own sound effect.
MHC-GT660
1
Press PRESET EQ, SURROUND or

GROOVE to select the audio
emphasis you want for your
basic sound.
2
Press BASS, VOCAL or GUITAR
to select a frequency band.
3
Press the button repeatedly
to select a frequency, and
then press +/
to adjust the equalizer level.
Repeat this for each band you
want to adjust.
Frequency
4
Hold down PRESET EQ
"COMPLETE" appears and the
setting is stored in the memory.


repeatedly
Equalizer level

.
MHC-GT440/GT220
1
Press PRESET EQ, SURROUND or

GROOVE to select the audio
emphasis you want for your
basic sound.
2
Press EQ BAND
to select a frequency band, and
then turn OPERATION DIAL
to adjust the equalizer level.
Repeat this for each band you
want to adjust.
Frequency band
3
Hold down PRESET EQ
"COMPLETE" appears and the
setting is stored in the memory.
To emphasize the equalizer level of a
particular band (MHC-GT660 only)
The equalizer level of the corresponding
band is raised and the equalizer levels of
the other bands are lowered while you

press FOCUS above one of BASS,

VOCAL or GUITAR

repeatedly

Equalizer level

.
.

Continued

GB