Check The Lint Filter - GE DDE7200S Use And Care Manual

Check the Lint Filter

Clean the lint filter each time the dryer is used. Always be sure the lint filter
is in place. Don't use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are
sorted correctly for washing, they're sorted correctly for drying. See the
How to Sort the Clothes section. If you do mix various types of fabrics in
your load, set the controls for the lighter-weight fabrics and remove when
dry. Reset controls for the remaining heavier fabrics.
the
See the Suggested Fabric and Drying Selections guide.
Select the proper heat for your load.
Should be used with cycles indicated
Automatic
Drying
Selections Regular cycle
Cottons
High Heat
Press
Medium Heat
No Heat
Low Heat
NOTE: Drying times will vary according to the
type of heat used (Electric, Natural gas or LP
gas), size of load, types of fabrics, wetness of
clothes, and condition of exhaust ducts.
Automatic
Knits Cycles cycles
Turn the Cycle Selector to the desired cycle
setting. The selector may be turned in either
direction.
Turn the Start knob to start the dryer. (Opening
the door during operation stops the dryer. To
restart, close the door and turn the Start knob.)