Rtp Settings - Cisco TelePresence SX20 Administrator's Manual

Cisco TelePresence SX20 Quick Set
Contents

RTP settings

RTP Ports Range Start
Specify the first port in the range of RTP ports.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous calls
that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65438>
Range: Select a value between 1024 and 65438.
RTP Ports Range Start: 2326
Example:
RTP Ports Range Stop
Specify the last RTP port in the range.
As default, the system is using the UDP ports in the range 2326 to 2487 for RTP and RTCP
media data. Each media channel is using two adjacent ports for RTP and RTCP. The default
number of ports required in the UDP port range is based on the number of simultaneous calls
that the endpoint is capable of.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1120..65535>
Range: Select a value between 1120 and 65535.
RTP Ports Range Stop: 2486
Example:
D14908.10 SX20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2012-2015 Cisco Systems, Inc. All rights reserved.
93
Administrator Guide
Setting passwords Appendices