Cisco TelePresence SX20 Administrator's Manual page 32

Cisco TelePresence SX20 Quick Set
Contents
User administration
(page 2 of 4)
Creating a new user account
Follow these steps in order to create a new user account:
1. Click Add new user....
2. Fill in the Username, Password and PIN code
the appropriate user roles check boxes.
As a default the user has to change the password and
PIN code when signing in for the first time.
Do not fill in the Client Certificate DN (Distinguished
Name) field unless you want to use certificate login on
HTTPS.
3. Set the Status to Active to activate the user.
4. Click Create User to save the changes.
Use the Back button to leave without making any
changes.
The password is used with the web interface and command line
*
interface; the PIN code is used with the TRC5 remote control and
on-screen menu when the Video OSD LoginRequired setting is
switched On.
D14908.10 SX20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Configuration > User Administration
, and check
*
System settings
www.cisco.com — Copyright © 2012-2015 Cisco Systems, Inc. All rights reserved.
32
Administrator Guide
Setting passwords Appendices