Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for WEVI Cam-Wave CW-5HD
Summary of Contents for WEVI Cam-Wave CW-5HD
-
Page 1: Operation Manual
CW-5HD Operation Manual EU Version 1st edition IDX Company, Ltd. - Page 2 - 2 -...
-
Page 3: Table Of Contents
Table of contents SAFETY INSTRUCTIONS ..............2 CONTENTS ................5 1. PRODUCT OVERVIEW ..............5 2. GETTING STARTED ..............6 2.1. CW-5HD TX (Transmitter) ............6 2.2. CW-5HD RX (Reciever)............8 3. LED INDICATOR ............... 10 3.1. LED indicator functions………………….…………………..…..……………….… 10 3.2. CW-5HD link initialisation …………………………………………..……………….. 11 4. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS o use this product safely and correctly please follow the safety precautions set out below. Product misuse may cause fire, shock, injury, product failure or other hazards. Please read this manual prior to using your CW-5HD and retain for future reference. - Page 5 Caution - continued Fire or excessive heat may cause injury or damage to surroundings. ●If ventilation openings are ●After long periods of continuous blocked, this may cause excessive use, the case of the unit may be heat or damage. warm be touch. ●Using CW-5HD ●Do not stare at LED lights on the...
-
Page 6: Product Overview
II. CONTENTS 1. Product Overview The CW-5HD is a wireless transmission device which transmits HD SDI video and SDI audio with 5GHz band radio frequencies. CW-5HD TX is the transmitter, and connects to a video source such as a video camera. CW-5HD RX is the receiver, and connects to a monitor, for example. -
Page 7: Getting Started
2. Getting Started 2.1. CW-5HD TX （Transmitter） ① ② ③ ④ ⑥ ⑤ 1. POWER MODE LED Indicates selected power output mode 2. LINK STATUS LED Indicates link status (Linked or Searching) 3. FREQ SELECT Selects transmitted frequencies Manual selection：CH1～CH4 Automatic selection：AUTO In AUTO position, transmitted frequency is selected automatically. - Page 8 ⑦ ⑪ ⑧ ⑨ ⑩ 7. SDI IN Connects to the video source’s SDI output connector. 8. SDI OUT Loop-outputs the input SDI signal. Used to allow for video monitoring on transmit side. 9. UNI/MULTI SW Selects the link mode. ：Unicast mode MULTI ：Multicast mode 10.
-
Page 9: Cw-5Hd Rx (Reciever)
CW-5HD RX （Receiver） ① ② ④ ③ 1. LINK LEVEL LED Indicates intensity of received signal. 2. LINK LED Indicates link status (Link on or Searching). 3. POWER SW Turns ON/OFF the power of CW-5HD RX. 4. V-Mount Mounts V-Mount type Lithium Ion battery. - 9 -... - Page 10 ⑤ ⑨ ⑥ ⑦ ⑧ 5. SDI-1 OUT Connects to the video input connector of monitor, etc. 6. SDI-2 OUT Connects to the video input connector of monitor, etc. 7. UNI/MULTI SW Select link mode. ：Unicast mode MULTI：Multicast mode 8. DC-IN Connects to external power supply.
-
Page 11: Led Indicator
3. LED indicators 3.1. LED indicator functions MODE STATUS LED Indicates the manually selected transmitted output power mode (HIGH/ LOW), and the UNICAST/MULTICAST setting. POWER MODE HIGH ：2 lights on POWER MODE LOW ：1 light on UNICAST ：LED light colour is Green MULTICAST ：LED light colour is Amber LINK LED Indicates the link status. -
Page 12: Cw-5Hd Link Initialisation
CW-5HD Link Initialisation (common to TX/RX) When the power switch of CW-5HD is turned on or the link of the transmitted signal is lost, the CW-5HD TX and CW-5HD RX will start to search for each other. The three LED lights will alternate on and off from bottom to top in sequence, repeating this process until a link is established. -
Page 13: Automatic Frequency Selection
4. Selecting frequencies and power output The CW-5HD TX is equipped with a FREQ SELECT switch and POWER MODE switch. With the FREQ SELECT switch, the transmitted frequency is set. The frequency selection is needed only on the TX. The frequency of the RX does not have to be selected because RX searches for the transmitted frequency automatically. -
Page 14: Link Modes - Unicast/Multicast
5. Link modes - UNICAST/MULTICAST The UNI/MULTI switch is used to select the link mode. The UNI/MULTI select switches on both the CW-5HD TX and CW-5HD RX must be set in the same mode. 5.1. UNICAST mode（1:1 communication） With UNI/MULTI switch in UNI position, CW-5HD links in UNICAST mode. In UNICAST mode, the link is made only between the same serial numbered pair of TX and RX (shipped as a pair). -
Page 15: Multicast Mode（1:N Communication
5.2. MULTICAST mode（1:n communication） With the UNI/MULTI switch in MULTI position, the CW-5HD links in MULTICAST mode, in which the CW-5HD TX can send video and audio to more than one CW-5HD RX. In MULTICAST mode, the transmitted signals are not encoded by 256bit AES encryption. -
Page 16: Operation Guide
6. Operation guide 6.1. Set up The CW-5HD does not include the various accessories that may be used in its operation. Please separately access the following items as needed for your specific application prior to use. BNC cable for HD-SDI or SDI signal connectivity IDX ENDURA system batteries or external power supply Note: Power supply;... -
Page 17: Back-Up Power Failure Function
6.3. If reception is unstable Signal reception may be affected by the position, height and angle of placement. If reception is not stable, please look for the best condition by adjusting the location, height, and other environmental variables. When CW-5HD TX and RX are used close to each other, the received signal becomes too strong and may disturb the video signal. -
Page 18: Notes On Use
7. Notes on Use （１） The service frequencies and transmit power outputs of CW-5HD vary depending on the designated regions, because each region has different local regulations or restrictions on radio waves. The units are Service Outdoor programmed in the factory prior Regions Channels frequencies... -
Page 19: Specifications
III. Specifications 8. CW-5HD TX Video / Audio Video input signal HD-SDI (conforms to SMPTE 292M) SD-SDI (conforms to SMPTE 259M-C) BNC 1 type Video input connector BNC 1 type （input signal direct loop through） Video output connector SDI Embedded （only CH1,CH2 transmitted） Audio input signal Video format HD：1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98,... - Page 20 Display / Operation Power switch Power ON/OFF Input battery power runs through to the output side when the power is OFF. Frequency 5-position rotary switch selector selecting CH1, CH2, CH3, CH4, AUTO Transmitted Slide switch shifting HIGH/LOW output switch UNI/MULT switch Slide switch UNI/MULTI UNI：Unicast mode（1:1 communication / encrypted）...
-
Page 21: Cw-5Hd Rx
9. CW-5HD RX Video / Audio HD-SDI (conforms to SMPTE 292M) Video output signal SD-SDI (conforms to SMPTE 259M-C) BNC 2 type（direct loop-through of the input signal） Video output connector SDI Embedded （only CH1,CH2 are transmitted） Audio output signal HD：1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98, Video format 720p/59.94, 720p/50 SD：525i/59.94 (NTSC or equivalent), 625i/50 (PAL or equivalent) - Page 22 Power Battery input：11-17V （using P-V2 IDX V-Mount） Power supply DC input：11-17V [XLR-4 male : No.1 negative (-)/ No.4 positive (+)] V-Plate（IDX A-NH2E or equivalent） Power output Applicable IDX ENDURA System Li-ion batteries batteries Battery input power is connected directly to camera side V-Mount. Automatically switches to battery supply when DC supply failed.
- Page 23 The material contained in this manual consists of information that is the property of IDX Company, Ltd. and is intended solely for the use by the purchasers of the equipment described in this manual. IDX Company, Ltd. prohibits the duplication of any portion of this manual or the use herein for any application other that the operation or maintenance of the equipment described in this manual without the express written permission of IDX Company, Ltd.
Need help?
Do you have a question about the Cam-Wave CW-5HD and is the answer not in the manual?
Questions and answers