Creating Still Picture From Motion Picture; Highlight & Time Frame Index - Panasonic HC-V770 Owner's Manual

Creating still picture from motion picture

A single frame from the recorded motion picture can be saved as a still picture.
*
4K MP4 scenes
AVCHD scenes
Scenes recorded as Backup for Twin Camera
Scenes recorded in the recording format [MP4/iFrame]
Scenes saved in MP4 (1920k1080/30p)
Scenes saved in MP4 (1280k720/30p)
Scenes saved in MP4 (640k360/30p)
WX970 VX870
* /
Press the button fully at the location to be saved as a still picture during
playback.
≥ It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥ Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be played
back from any midway point of the scene you wish to see.
≥ Operate the zoom lever to
thumbnail display to Highlight & Time Frame Index.
1
Touch .
≥ To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching
it.
j Touch (up) /
2
Touch the desired search condition.
[3 SEC.]/[6 SEC.]/[12 SEC.]/[MINUTES]/[FACE]/[HIGHLIGHT]
≥ [FACE] and [HIGHLIGHT] are not available when you play back a 4K MP4 scene*, MP4/iFrame
scene or scene recorded as Backup for Twin Camera.
WX970 VX870
* /
≥ When select [FACE], it will select the portion for which Face Recognition was performed from the
scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select
[HIGHLIGHT].
Scene type
only
side and change over the
(down) on the thumbnail scroll lever.
only
(l 30)
(l
- 95 -
Picture size
(3840k2160)
8.3M
(1920k1080)
2.1M
(640k360)
0.2M
29)