Mic Level - Panasonic HC-V770 Owner's Manual

≥ If you wish to record higher quality sound and maintain realism even when zooming in, for
instance, when recording a music recital, we recommend setting [MIC SETUP] to [SURROUND].
≥ [STEREO MIC] will be selected in the following cases:
WX970 VX870
/
j
When [REC FORMAT] is set to [4K MP4]
j When [REC FORMAT] is set to [MP4/iFrame]
≥ When [Directional] in [Customize] in [Sound Scene Select] is set to [MONO], [SURROUND] and
[STEREO MIC] cannot be set. (If you set [MONO], [SURROUND] and [STEREO MIC] will be
switched to [ZOOM MIC])

[MIC LEVEL]

When recording, the input level from the built-in microphones and the external microphone terminal
can be adjusted.
1 Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
MENU
[AUTO]:
[SET ]:
[SET ]:
2
(When [SET
Touch /
≥ The adjustment screen to be displayed depends on the
setting of [5.1ch/2ch].
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the sound
is distorted.) Select a lower setting for microphone input
level.
3 Touch [ENTER].
≥ Touch [EXIT] to complete the setting.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
≥ The sound will be recorded in stereo (2ch) when [5.1ch/2ch] is set to [2ch] or an external
microphone is input.
(microphone input level meter) is displayed on the screen when [5.1ch/2ch] is set to
≥
[5.1ch], and
and [MIC LEVEL] is set to a setting other than [AUTO].
≥ You cannot record with the audio completely muted.
AGC is activated, and the recording level is adjusted automatically.
The desired recording level can be set. AGC is activated, and sound
distortions are reduced.
The desired recording level can be set. Sounds are recorded in
natural quality.
]/[SET ] is selected)
to adjust.
(microphone input level meter) is displayed when [5.1ch/2ch] is set to [2ch]
(When set to [5.1ch])
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
- 88 -