Panasonic HC-V770 Owner's Manual page 182

[WPS Connection]
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Set the smartphone to WPS Mode.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
Connecting with QR code
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5
Start up the smartphone application "Image App".
6
On the smartphone, select [QR code], and scan the QR code displayed on the
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the "Image App", and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.
≥ When the QR code cannot be scanned, refer to "Connecting by entering an SSID and Password".
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
(l 147)
- 182 -