Miele downdraft extractor Instruction Manual page 27

 Fit the upper brackets loosely to the
downdraft extractor casing.
The brackets can be pushed into the
holder.
 Push the brackets upwards and
screw them into place under the
worktop.
 Tighten the screws on the casing.
 Alternatively the brackets can also be
rotated when fitting them, so that the
downdraft extractor can be secured
to the sides of the housing unit.
2x
M4 x 8 mm
2x
4 x 15 mm
 Align the downdraft extractor
vertically and screw the brackets
securely to the base of the housing
unit.
Installation
27