HIKVISION DS-2CD883F-E Installation Manual page 53

Installation Manual of Network Camera
3. Attach the drill template (supplied) to the place where you want to fix the camera.
4. According to the drill template as shown below, drill three screw holes in the ceiling.
5. If you want to route the cables inside the ceiling, drill a cable hole in the ceiling according to the
drill template. Skip this step if you want to route the cables on the surface of the ceiling. Refer to
Conduit Installation on the Side for side cable routing.
6. Attach the camera to the ceiling by aligning the holes of the back box with the holes on the
ceiling.
7. Secure the camera with the supplied screws as shown below.
Lo-Call 1890 866 900
Black Liner
Figure 3-62 Remove the Bubble and Black Liner
Side Cable Outlet
Drilling Template for Outdoor
Day/Night Vandal-proof Dome Camera
Figure 3-63 Drill Template
www.cctvireland.ie
Screw Hole
Bubble
Cable Outlet
Screw Hole
52
shop@cctvireland.ie