Wall Mounting - HIKVISION DS-2CD883F-E Installation Manual

Hikvision network camera installation manual
Hide thumbs Also See for DS-2CD883F-E:
Table of Contents

Advertisement

Installation Manual of Network Camera
2). Loosen the knob on the ceiling mount to adjust the tilt angle [0° -90].
6. Adjust the Lens
1). Connect the VIDEO OUT interface of the camera to the debugging monitor.
2). Adjust the Zoom Lever and Focus Lever to obtain a perfect image on the monitor.
Figure 2-12 Install the Camera to the Mount and Adjust the Angle
 Wall Mounting
1. Install the lens (not supplied) to the camera and rotate it to get it tightened.
2. Plug the auto-iris cable to the auto-iris interface.
3. Loosen the lock screw on the mount and remove the tilt adjust table from the wall mount.
Lo-Call 1890 866 900
Figure 2-13 Install the Lens
www.cctvireland.ie
Knob
shop@cctvireland.ie
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-2cd854f-eDs-2cd855f-eDs-2cd854f-ewDs-2cd883f-ewDs-2cd864f-eDs-2cd854fwd-ew ... Show all

Table of Contents