Preparing For Shipment - KVH Industries TracVision 6 Technical Manual

Satellite television
Hide thumbs Also See for TracVision 6:
Table of Contents

Advertisement

4.9

Preparing for Shipment

If you need to repack the antenna unit for shipment, the shipping
restraints removed during installation must be reinstalled. Follow
the steps below to reinstall the restraints.
1. Rotate the azimuth mechanism slowly to find the
limit switch stop. The front of the antenna should
be facing the forward arrow.
2. Rotate the azimuth mechanism 180˚ in the
opposite direction to ensure that the mechanism is
not resting on the limit switch stop.
3. With the antenna reflector slightly elevated, slip
the narrow end of the elevation shipping restraint
beneath the lip of the antenna reflector. Gently
wedge the restraint inside the baseplate as shown
in Figure 4-13.
54-0166
oam Restraint
When rotating the azimuth
mechanism by hand, go slowly!
Hitting the mechanical stops with
excessive force will damage the
azimuth limit switch.
Figure 4-13
Elevation Shipping Restraint
Placement
Maintenance
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents