A Guide to TracVision 4
G-2
Help on Parser Commands
Function:
Command:
Argument:
Response:
G.2 Manual Positioning Commands
Azimuth Angle
Table G-2
Function:
Command:
Argument:
Response:
Elevation Angle
Function:
Command:
Argument:
Response:
Azimuth CW Step
Function:
Command:
Argument:
Response:
lists parser commands
HELP
none
print a list of all parser commands
HALT
commands a manual azimuth angle that the
mechanism moves to
AZ,xxxx (range is 0000-3599)
desired azimuth angle of the mechanism relative to
external magnetic reference, or baseplate fwd,
000°-359.9°
echoes the command; mechanism moves at a
fixed velocity
commands a manual elevation angle that the
mechanism moves to
EL,xxx (range is 100-850)
desired elevation angle of the mechanism relative
to up, 10.0°-85.0°
echoes the command; mechanism moves at a
fixed velocity
commands a 0.1 deg CW manual step in azimuth
angle
6
none
echoes the command