Panasonic HC-V770 Operating Instructions Manual page 203

If the device is Android (non-NFC-compatible) or iOS
≥ The QR code is not displayed when [Direct Connection Password]
Refer to "Selecting this unit's SSID and entering a password on the smartphone to set up a
connection"
≥ The default setting for [Direct Connection Password] is [OFF].
∫ Selecting this unit's SSID and entering a password on the
smartphone to set up a connection
1
(When using the Wi-Fi Setup menu)
Press Wi-Fi button on this unit and touch [TWIN
CAMERA].
(When using the recording screen)
Touch the recording screen on this unit and
touch .
2
Touch [Smartphone] on the screen of this
unit.
3
(When [Direct Connection Password] is set to [OFF])
On the smartphone, set the SSID displayed
on the screen of this unit.
≥ When using an Android device, perform the following
operations:
1 Start up the smartphone application "Image App".
2 On the smartphone, select [Wi-Fi], and select the SSID displayed on this unit.
≥ When using an iOS device, perform the following operations:
1 On the smartphone, select the SSID displayed on this unit from the Wi-Fi setup menu.
2 Start up the smartphone application "Image App".
* If this is the first time the smartphone is connecting to this unit, a message will be displayed on
the screen of this unit. Touch [YES].
≥ When the connection is complete, the image being captured by the smartphone will be displayed
on the Sub Window of this unit.

A [Wireless Twin Camera]
B [Smartphone]
C [Other Camera]
D [CANCEL]
*
- 203 -
(l 194) is set to [OFF].

A [TWIN CAMERA]
B [EXIT]
 
*
1/2


