Using [Remote Ctrl] With A Direct Connection - Panasonic HC-V770 Operating Instructions Manual

Using [Remote Ctrl] with a direct connection

∫ If the device is Android (NFC-compatible)
≥ Set the NFC function of the smartphone to ON.
1
Start up the smartphone application "Image App".
2
Touch the smartphone on
≥ Touch the NFC touch area while the NFC mark is displayed on
the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
≥ If the unit is not recognised even when touching the
smartphone, change positions and try again.
≥ You cannot set up a connection when recording an image with this unit.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
≥ This unit is turned on even if it touches the smartphone on
turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
∫ If the device is Android (non-NFC-compatible) or iOS
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (l 188).
1
Press Wi-Fi button on this unit and touch [Remote Ctrl].
≥ It will go into connection standby for remote operation.
2
Start up the smartphone application "Image App".
≥ (When [Direct Connection Password] is set to [OFF])
If this is the first time the smartphone is connecting to this unit, a message will be displayed on
the screen of this unit. Touch [YES].
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
message is displayed.
≥ The
≥ After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on
with the power button, this unit will not turn on by touching the smartphone on
of this unit.
of this unit again.
Touch [YES] to close the indication.
of this unit, where this unit is
of this unit. (If you have turned off this unit
- 154 -
of this unit)