Adjusting Tailstock Longitude Position; Dead Center - Grizzly G0516 Owner's Manual

3.
about pushing the dead center into the barrel
too far. The force of the center contacting a
mounted workpiece will fully seat the taper
when the handwheel is tightened.
4.
Figure 18.
Removing Tailstock

Dead Center

To remove the tailstock dead center:
1.
2.
Figure 18
Note—do not worry
Adjusting Tailstock
Longitude Position
Figure 19.
To adjust the tailstock longitude position:
1.
2.
3.
Figure 19