Subscribe to Our Youtube Channel
Summary of Contents for Talon Digital Video Security System
- Page 1 Talon Net (Integration) Ver 11.06.x Installation and User’s Guide Digital Video Security System Digital Video Recorder *All contents of this document may change without prior notice.
-
Page 2: Table Of Contents
T a l o n - N E T D V R INDEX 1. Forward 2. Introduction 3. Installation 4. Using Net software 4.1. Talon Login Setup 4.1.1. Site Setup 4.1.2. Setup Connection Mode 4.1.3. MISC. Configuration 4.1.4. IP Server Setup 4.1.5. Change Login Password 4.2. -
Page 3: Forward
The ability to be able to perform total control from any place any time is what Talon Net makes by introducing Network Security Program for the next generation. -
Page 4: Introduction
PTZ Controls can be attained by manipulating Talon Net program. • Manipulate Talon DVR Settings Ability to change settings of Talon DVR system from Talon Net, such as enable / disable of cameras, change recording schedule, and change setting of sensors. •... -
Page 5: Installation
Click 'Setup.exe' and follow the procedure. After installation, following folder will be created in the Start menu. Talon Net: Talon Net program AVI Viewer: Program to view video clips recorded at the local storage. Event Viewer: Program to view event log. -
Page 6: Using Net Software
Password for Login. • Confirm P/W: Reconfirm the password Note: The user created here is for local manager, which is not related the user(s) registered at Talon DVR System. After you input the above information, click “OK”. Then, “Add, Delete and Edit site information”... -
Page 7: Site Setup
IP Server, select “SERVER”. • Address: Assign IP address of system or IP address in use of IP Server. • User name: Enter ID, registered in Talon DVR System. • Password: Enter password, registered in Talon DVR System Talon... - Page 8 Click “OK” to finish a new site setting, then the added site will be listed as following. In order to edit the site information already stored, double click on the site name to change the data. “Save” must be clicked to take effect. Talon...
-
Page 9: Setup Connection Mode
-Partial: Choose to display multiple cameras from the site. Number of cameras must be assigned. For example, the position 8 will display camera 1, 3, 6, 9, and 14 sequentially from site name Office. “Save” must be clicked to take effect. Talon... -
Page 10: Misc. Configuration
IP Server. Code must be named less than 10 digits, using case sensitive alpha-numeric characters. •Interval: Selects the time interval to notify current IP address to the IP Server. “Save” must be clicked to take effect. Talon... -
Page 11: Change Login Password
T a l o n - N E T D V R 4.1.5. Change Login Password •Old Password: Enter current password •New Password: Enter new password •Confirm Password: Confirm new password. “Save” must be clicked to take effect. Talon... -
Page 12: Accessing Talon Net
T a l o n - N E T D V R 4.2. Accessing Talon Net Type login and password and click “LOGIN”. : Minimize Talon et software in the syste m tray. Click at right bottom corner will bring full window. - Page 13 : When the PTZ camera supports preset function and tour, this control is available at Talon Net. However, settings of preset and tour must be made at Talon DVR System. And No. of available preset points are depending on the camera’s feature.
- Page 14 : Open the “Config / Settings” Window (Refer to 4.1.Talon Login Setup for etail). : Records all displayed channels. Each channel will be recorded in MP4 format at the AVI Path assigned from “Config / Settings”...
- Page 15 The functions of four taps are “Send Voice” / “Receive sound” / “Send and receive voice” / “cancel”, from the left. : Displays status of Relay on Talon DVR System. Relay can be activated / deactivated by clicking on the buttons.
-
Page 16: Remote Search
T a l o n - N E T D V R 4.3. Remote Search Search data of Talon DVR System from remote location usin g Talon Net. : Click the remote search button to start. The window on the left will show up with list of registered sites Select the site to search, and click “OK”... - Page 17 The searching point can be selected by clicking the ca mera number, hour, and minute (shown in red). : In above picture, selection of camera can be done by clicking these buttons, scrolling camera group as 4 camera in a group, namely 1~4, 5~8, 9~12, 13~16. Talon...
- Page 18 MP4 format. : Initia te “Smart Search” featu re shown below. Note: Please refer to the Talon DVR manual r detail information about this feature. Motion Sensitivity may be different than running this feature from Talo...
-
Page 19: Remote Setup
T a l o n - N E T D V R .4. Remote Setup : A low user to change the configuration of Talon DVR System from Talon Net. The follow ing screen will allow the user to select the site. -
Page 20: Appendix
Save as Snapshot: select to capture the image. It will bring up a snapshot window with a captured image, and the image can be saved a s a jpg format file by double clicking on the s napshot window. Talon... -
Page 21: Event Notification
From “Color & motion” of “Camera Setup”, check “Detective motion – Notification”. Click on “Properties”, and check “Remote Notify” to send notifications when an event occurs. Check “Use Notify Schedule” to utilize the schedule to notify the Talon Net. If selected, notification schesule on the folloing page must be configured. Talon... -
Page 22: Dial-Up Connection
Event Viewer. Also it will allow to restore the Net software, if any event occurred and notified while Net software is minimized. The Talon Net may be minimized, but must be running in order to receive the notification. The icon will be place on the system tray when it is minimized. - Page 23 T l o n - N E T D V R Click ‘Next’. Select “Set up an advanced connection”, and Click “Next”. Check “Accept incoming c onnection” and Click “Next”. Talon...
- Page 24 Select a proper modem from device list, and click “Next” Select “Do not allow virtual private connections”, and click “Next”. Click “Add” o add a new user. The user must be created to allow connection to the Talon DVR System. Talon...
- Page 25 Client, w ich will be discussed on the next chapter. Note: The “Allowed User” means “RAS User” who can access the Dial-Up server from Dial-Up Client. After a user created, make sure to check the user created, and click “Next”. Select “Internet Protocol TCP/IP” and click ‘Properties’. Talon...
- Page 26 Click “OK”, and click “Next” at the Networking Components. When the connection established successfully, ‘From’ IP will be the virtual IP of the server, Talon DVR System, and ‘To’ IP will be assigned to the client. Specify the connection name and click “Finish...
-
Page 27: Installation Of Dial-Up Client
T a l o n - N E T D V R 5.4.2. Installation of Dial-Up Client On Talon Net system, click “Start > Setup > Co ntrol pad > Network Connection.” Click “Create a new connection.” Click ‘Next’. Selec t “Connect to the Internet”, and Click “Ne... - Page 28 T a l o n - N E T D V R Select “Set up my connection manually”, and Click “Nex t”. Select “Connect using a dial-up modem”, and Click “Nex t”. Set ISP Name as you want, and Click “Next”. Talon...
- Page 29 T a l o n - N E T D V R Enter the phone number which is assigned to the Talon DVR System, and Click “Next”. Enter the user information, which was created on the Talon D VR System, and Click “Next”.
-
Page 30: Using Dial-Up Connection
Username & Password: user information registered at the Talon DVR System. After setting the site information as above, it is ready to connect to the Talon DVR System. Note: The image will be displayed very slowly due to the limited transmission speed.
Need help?
Do you have a question about the Digital Video Security System and is the answer not in the manual?
Questions and answers