Removing A Fuse; Replacing The Fuse; Ignition Curve Plug Connection; Changing The Ignition Curve - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing a fuse

Replacing the fuse

Warning
Fire hazard The electrical system can be overloaded by the use of incorrect fuses.
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.

Ignition curve plug connection

Changing the ignition curve

Changing the ignition curve from Performance to Soft.
Separate plug connection
Soft Greater flexibility
Changing the ignition curve from Soft to Performance.
Connect plug connection
Performance Higher performance
Switch off all power-consuming components and switch off the engine.
Dismount the air filter box lid. (
Remove the protection cover
Info
The fuse
Remove the fuse
400270-10
Check parts for damage and wear. Replace damaged or worn parts.
Info
A reserve fuse
Replace a burned-out fuse
Refit the fuse.
Fuse (58011109110)
Info
400273-10
If the new fuse burns out, contact an authorized KTM workshop.
Replace the protection cover.
Install the air filter box lid. (
The plug connection
Possible states
• Soft If the plug connection is separated, riding is more flexible.
• Performance
achieved.
500218-10
. (Figure 500218-10 P. 52)
. (Figure 500218-10 P. 52)
P. 58)
.
is located in the starter relay
.
is located in the starter relay.
only by an equivalent fuse.
P. 58)
is located in front of the fuel tank on the left of the frame.
If the plug connection is connected, higher performance is
under the filter box cover.
52