Adjusting Chain Tension - After Checking; Adjusting Chain Tension - Fitting Rear Wheel - KTM 450 SMR Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting chain tension - after checking

Adjusting chain tension - fitting rear wheel

Loosen nut
Loosen nuts
Adjust the chain tension by turning the adjusting screws
Specification
Chain tension
Turn the adjusting screws
right chain adjusters are in the same position relative to the reference marks
The rear wheel is then correctly aligned.
Tighten nuts
Make sure that the chain adjusters
screws .
Tighten nut
Specification
Nut, rear wheel spindle
Info
The wide adjustment range of the chain adjusters (32 mm) enables different
secondary transmissions with the same chain length.
500193-13
The chain adjusters
Loosen nuts
Adjust the chain tension by turning the adjusting screws
Specification
Chain tension
Turn the adjusting screws
right chain adjusters are in the same position relative to the reference marks
The rear wheel is then correctly aligned.
Tighten nuts
500193-11
.
.
left and right so that the markings on the left and
.
are fitted correctly on the adjusting
.
can be turned by 180°.
.
left and right so that the markings on the left and
.
left and right.
8... 10 mm (0.31... 0.39 in)
M20x1,5 80 Nm
(59.01 lbf ft)
left and right.
8... 10 mm (0.31... 0.39 in)
37
.
.