Download Print this page

Davies Craig DCSL-8 Installation Instructions Manual

Davies craig thermatic fan kits installation instructions

Advertisement

Quick Links

THERMATIC FAN KITS ~ INSTALLATION INSTRUCTIONS
BEFORE BEGINNING INSTALLATION, PLEASE READ THESE INSTRUCTIONS VERY CAREFULLY.
FAILURE TO COMPLY WITH ALL THE INSTRUCTIONS MAY INVALIDATE THE MANUFACTURER'S
WARRANTY.
A. PREAMBLE
Congratulations on purchasing a Davies, Craig
Thermatic Fan Kit. This Fan Kit is suitable for both
air-conditioning condenser and engine radiator
cooling. We trust you've selected the most suitable
model for your application. If you have any questions
please contact Davies, Craig direct on (03) 9369-
1234 or info@daviescraig.com.au
B. KIT REQUIREMENTS:
This kit includes all parts necessary for condenser
cooling. If you wish to cool the vehicle radiator you
should purchase one of Davies, Craig's Thermatic
Switches Parts: #0401 or #0444 from your retailer or
on
line
from
the
www.daviescraig.com.au. If you wish to cool both
radiator and condenser cores you should purchase a
Thermatic Switch & Relay Kit #0404 which contains
a Thermatic Switch, #0401 and an extra relay and
wiring loom or the Digital Electronic Switch #0444.
C. FAN ORIENTATION
All Davies Craig fans are reversible and may be
mounted
either
radiator/condenser) or downstream (on the engine
side of the radiator/ condenser).
N.B. ALL THERMATIC FANS ARE FACTORY
ASSEMBLED TO BE MOUNTED UPSTREAM (in
front of radiator/condenser)
if there is insufficient space in front of the
radiator/condenser, the fan may be mounted
downstream, provided four steps are taken before
mounting.
P/No:0950
8", 9", 10", 12", 14", 14HP", 16" FANS
Davies,
Craig
upstream
(in
front
77 Taras Avenue
P.O. Box 363
Altona North, Vic 3025 Australia
Phone: +61(0)3 9369 1234
Fax:
+61(0)3 9369 3456
E-mail: info@daviescraig.com.au
Web: www.daviescraig.com.au
For downstream mounting
(i) Remove the clip or undo the hex nut from the
centre of the fan blade.
(ii) Remove the fan blade from the motor shaft, turn
it over and replace. In every case the instruction,
printed on the blade, 'this side must face front of
vehicle' or 'this side must face rear of vehicle'
must be followed.
(iii) Re-secure the fan blade
(iv) Before mounting the fan to the face of the
radiator/condenser, note the direction of the
arrow on the fan blade and when wiring, ensure
the fan rotates in the direction of the arrow in all
cases.
website,
Optimum Thermatic Fan performance (forced air
flow) will be achieved by mounting the fan directly to
the surface of the respective condenser and radiator
core.
If you are having your fan fitted by a professional,
please ask that these instructions are read in full and
understood before installation.
of
Vehicles used for towing caravans and large trailers
may need to retain the standard belt-driven fan, at
least in summer, with the electric fans fitted in the
upstream position.
Air-conditioned
condenser fan such as the 9" or 10" if one is not
already fitted. The 12" and 14" are suitable for
cooling condensers on large sedans and wagons
and the 14"HP or 16" is suitable for condenser
cooling on large commercial vehicles.
cars
should
be
fitted
with
a

Advertisement

loading

Summary of Contents for Davies Craig DCSL-8

  • Page 1 Digital Electronic Switch #0444. If you are having your fan fitted by a professional, C. FAN ORIENTATION please ask that these instructions are read in full and All Davies Craig fans are reversible and may be understood before installation. mounted either...
  • Page 2: Radiator Cooling

    THERMATIC SWITCHES and the smaller downstream, with as little overlap as possible. Davies Craig offers four Thermatic Switches to suit various Thermatic Fan applications; 4. Pay particular attention to the markings/arrows The Digital Electronic Thermatic Switch, Part #0444.
  • Page 3: Important Notes

    ‘Model Selection Guide’, with an air-conditioner condenser fan. This will give you all the benefits of electric cooling. If overheating persists there may not be enough coolant flow. The Davies Craig EWP (Electric Water Pump) will solve the www.daviescraig.com.au problem.
  • Page 4 FAN ROTATION AND POLARITY RADIATOR DAVIES CRAIG UPSTREAM DOWNSTREAM Fan Models DCSL-8 MOTOR - EARTH BLUE or RED BLACK DCSL-9 WIRE DCSL-10 DCSL-12 DCSL-16 FAN ROTATION DCSL-14HP BLACK BLUE or RED DCSL-14 MOTOR-EARTH WIRE & FAN ROTATION NOTE: Rotation as viewed from front of vehicle must be clockwise in all cases, except DCSL-14 which rotates anti-clockwise.
  • Page 5 P/No:0950...
  • Page 6 DAVIES, CRAIG THERMATIC FAN WIRING DIAGRAMS WITH #0401 SWITCH ONE FAN, CONDENSER ONLY BLUE CONNECTOR (FROM FAN KIT) SELF TAPPER (FROM FAN KIT) SCOTCHLOCK (FROM FAN KIT) RING TERMINAL (FROM FAN KIT) FUSE HOLDER & FUSE (FROM FAN KIT LOOM) PURCHASE: 1 FAN KIT WARNING: ENSURE IGNITION SOURCE IS NOT CONNECTED TO THE ENGINE MANAGEMENT SYSTEM ONE FAN, THERMATIC ONLY...
  • Page 7 P/No:0950...
  • Page 8 P/No:0950...

This manual is also suitable for:

Dcsl-9Dcsl-10Dcsl-12Dcsl-16Dcsl-14hpDcsl-14