Connect The Usb Cable - Brother MFC-6890CDW Quick Setup Manual

USB
16

Connect the USB cable

Important
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
computer.
a
Lift the scanner cover into the open position.
b
Remove the USB label.
c
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
LAN USB
14
symbol. You will find the
d
Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your computer.
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
e
Gently close the scanner cover using the finger
holds on both sides of it.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on both
sides of the scanner cover when opening and
closing it.
®
Windows