Caliber 9516/3030 USER MANUAL SYNCHRONIZING THE HANDS From each mode, push the crown at least 3 seconds. Movement is going into synch mode for adjust and synchronize the hands position. Push A Turn up or down the crown Push the crown to get out...
Page 4
Caliber 9516/3030 USER MANUAL NEUTRAL FUNCTION Actions: A: not used B: not used B 1 second: not used Crown push: Change mode 17/01/2014 Page 4/13...
Caliber 9516/3030 USER MANUAL ALARM FUNCTION Actions: A: Change alarm status B: not used B 1 second: Alarm setting Crown up or down: EL on for 5 seconds Crown push: Change mode 17/01/2014 Page 5/13...
Page 6
Caliber 9516/3030 USER MANUAL To adjust Alarm push B at least 1 second. Out of setting mode To go out of setting mode quickly, push the crown, else wait for 5 seconds. 17/01/2014 Page 6/13...
Page 7
Caliber 9516/3030 USER MANUAL TIME 2 FUNCTION Actions: A: not used B: not used B 1 second: Time 2 setting Crown up or down: EL on for 5 seconds Crown push: Change mode 17/01/2014 Page 7/13...
Page 8
Caliber 9516/3030 USER MANUAL To adjust Time 2 push B at least 1 second. Out of setting mode To go out of setting mode quickly, push the crown, else wait for 5 seconds. 17/01/2014 Page 8/13...
Page 9
Caliber 9516/3030 USER MANUAL CHRONO FUNCTION Actions: Read description down 17/01/2014 Page 9/13...
Page 10
Caliber 9516/3030 USER MANUAL 1. Measure of elapsed time Push on A to start the chrono. Push on A to stop the chrono, display sows the elapsed time. Push on B to reset the chrono. 2. Measure of cumulated time Same operations as 1.
Caliber 9516/3030 USER MANUAL DATE FUNCTION Actions: A: not used B: not used B 1 second: Date setting Crown up or down: EL on for 5 seconds Crown push: Change mode 17/01/2014 Page 11/13...
Page 12
Caliber 9516/3030 USER MANUAL To adjust Date push B at least 1 second. To go out of setting mode quickly, push the crown, else wait for 5 seconds. 17/01/2014 Page 12/13...
Caliber 9516/3030 USER MANUAL LOW BATTERY When Low battery is detected all functions are disabled, small second is stopped. If Alarm was ON it will not be disabled until ring. 17/01/2014 Page 13/13...
Need help?
Do you have a question about the 9516 and is the answer not in the manual?
Questions and answers