NEC Advanced Personal Computer System Reference Manual page 4

FEDERAL COMMUNICATIONS COMMISSION RADIO
FREQUENCY INTERFERENCE STATEMENT
"w
ARNING: This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to
comply with the limits for a Class A Computing device pursuant to Subpart] of
Part 15 of FCC Rules, which are designed to provide protection against such
interference. Operation of the equipment in a residential area is likely to cause
interference in which case, the user will be required to take whatever measures may
be required to correct the interference."
Manufacturer's Instructions and User's Responsibility
to Prevent Radio Frequency Interference
Manufacturer's Instructions
The user must observe the following precautions when installing and operating this
device:
1. Operate the equipment in strict accordance with the manufacturer's
instructions for the model.
2. Ensure that the unit is plugged into a properly grounded wall outlet and
that the power cord supplied with the unit is used and not modified.
3. Ensure that the unit is always operated with the factory-installed cover set
on the unit.
4. Make no modifications to the equipment which would affect its meeting the
specified limits of the Rules.
5. Properly maintain the equipment in a satisfactory state of repair.
User's Responsibility
The user has the ultimate responsibility to correct problems arising from harmful
radio-frequency emissions from equipment under his control. If this equipment
does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures. All of these responsibilities and any
others not mentioned are exclusively at the expense of the user.
111