Optional Configurations - Krell Industries Krc-3 Owner's Reference Manual
Remote control line-level preamplifier
Table of Contents
BASIC
PREAMPLIFIER
OPERATION
MUTE
Front panel:
To mute, press the active
source's
input button.
Remote control:
Press the mute button.
Front panel:
To unmute the KRC-3, press
the active
source's
input
button
again.
If the source
is changed while
the KRC-3 is muted,
press
the new
source's
input button a second time to unmute the KRC-3.
Remote control:
Press
the mute button.
OPTIONAL
CONFIGURATIONS
S3/proc:
For simplified
integration
of an A/V surround
sound processor,
the
S3/proc input can be set to operate
as a unity gain stage.
In this
mode, when
the S3/proc
input
is selected,
the KRC-3's volume control
and balance
is
disabled.
Volume control
is transferred
from the KRC-3 to the A/V surround
processor
connected
to the S3/proc
input.
The left
and right
channel
volume
settings
are now independent
of the KRC-3's volume control
and the overall
system level is determined by the A/V surround processor
exclusively.
S4/tape: The S4/tape input is set to operate
as a tape monitor.
A tape monitor
allows
you to listen
to the output
from your recorder
and enables
you to
examine your recording
for imperfections
or distortions.
After
selecting
a
source
for recording
(B1, S1, $2, or $3),
repeated
pressing
of the S4/Tape
button will toggle between the tape recorder
output (LED illuminated)
and the
input source (LED not illuminated).
If your system does not include
a tape
recorder,
the S4/Tape input
can be
configured for operation as a standard input identical
to the S 1 and $2 inputs.
NOTE: The factory
default
positions
sets
S3/Proc
as a standard
input
and
S4/Tape as a tape monitor input.
6
Hide quick links:
Table of Contents
Need help?
Do you have a question about the KRC-3 and is the answer not in the manual?