Sony WLL-RX55 Operation Manual page 27

Wireless camera receiver
Hide thumbs Also See for WLL-RX55:
Table of Contents

Advertisement

Digital monitor signal outputs
SDI/ASI
BNC type (3)
Transmission cable length: max. 200 m
SDI:
4:2:2 component serial digital
(270 Mb/sec): 0.8 Vp-p, 75 ohms
ASI:
DVB-ASI, EN50083-9 (DVB-PI-232
Revised TM Rev.2)
Transmission mode: Data-packet mode
(188 bytes)
Analog monitor signal outputs
VIDEO-1
BNC type (1)
composite, 1.0 Vp-p, 75 ohms
VIDEO-2
BNC type (1)
composite, 1.0 Vp-p, 75 ohms
VIDEO-3
BNC type (1)
composite, 1.0 Vp-p, 75 ohms
PIX
BNC type (1), 1.0 Vp-p, 75 ohms
WF
BNC type (1)
Encode output: 1.0 Vp-p, 75 ohms
WF MODE
4-pin (1)
AUDIO OUTPUT
XLR 3-pin (2)
0 dBu/–20 dBu balanced, 2 channels
Other inputs/outputs
REMOTE
8-pin multiconnector (1)
INTERCOM/TALLY/PGM
D-sub 25-pin (1)
4W/RTS
TALLY: DC 24 V, TTL level, or contact
selectable
MIC REMOTE
D-sub 15-pin (1)
INTERCOM (front)
XLR 5-pin (1)
CAMERA CONTROL
XLR 3-pin (1)
Power input/output
DC OUT
4-pin (1)
DC power output (max. 200 mA)
DC IN 10.5-17V 4-pin (1)
DC power input
Supplied accessories
Reception antenna (2)
Down-converter (2)
Mounting bracket (2)
Mounting screw: M3 (4), M4 (8)
Coaxial cable with N-type connectors (10 m) (2)
4-pin connector (1)
Fasten belt (10)
Number plate (1 set)
Operation Manual (1)
CD-ROM (1)
Design and specifications are subject to change without
notice.
27
Specifications

Advertisement

Table of Contents
loading

Table of Contents