Table of Contents
Advertisement
Preset the channels automatically
(ASM function)
Use remote control for this operation. The buttons on the TV
with similar name may also be use.
1
Select the starting position for channel to be preset.
Press the Number buttons (-/--, 0~9) or CH s/t.
2
Set the correct broadcast system for your region. Press
MENU and then ; -/+ to highlight the "
icon.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
SELECT /
Confirm "COLOR MODE" is set to "AUTO" and
"SOUND MODE" is set to proper system. If not, press
CH s/t to select "COLOR MODE" or "SOUND MODE"
and press ; -/+ to set each proper system.
3
Press MENU and then ; -/+ to highlight
the "
TUNING" icon. Select "ASM", then press ; +
to start the search. When the TV screen returns to the
start position, the procedure is complete.
TUNING
CH
MFT
AFT
ASM
SEARCH
CH
POSITION
MEMORY
SELECT /
Presetting channel
•
First, use the ASM (Automatic Search Memory) function
to preset all active channels in your area automatically.
Then, arrange the preset channels with the SEARCH,
SKIP and MFT (Manual Fine Tuning) functions so that
you can tune into only desired channels.
•
Use the SEARCH function if desired channels cannot be
preset with the ASM or if you would like to preset channels
to specific position numbers one by one.
PROGRAMMING CHANNEL MEMORY
Model 29CZ5DE is used in this manual for illustration purpose.
1
SET UP"
ENGLISH
AUTO
B/G
OFF
ON
FAST
ADJUST –/+
BACK
MENU
OFF
P001
ADJUST –/+
BACK
MENU
– 16 –
To use the SEARCH function
1
Press MENU and then ; -/+ to highlight
the "
TUNING" icon.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
SELECT /
2
Press CH s/t to select "SEARCH". Press ; -/+ to
start searching. Pressing "–" searches for channels at
lower frequencies while pressing "+" searches for
channels at higher frequencies. While searching,
pressing the opposite direction button, + and -
respectively, will cancel SEARCH function.
TUNING
MFT
AFT
ON
ASM
SEARCH
POSITION
P001
MEMORY
SELECT /
ADJUST –/+
BACK
MENU
Repeat this process until you can get the desired
channel.
3
When the desired channel is shown, press CH t to
select "POSITION". Press the ; -/+ buttons
repeatedly until the position number to be preset is
shown.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
SELECT /
4
Press CH s/t to select "MEMORY", then press ; +
to memorize the channel at the current position.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
SELECT /
5
When you program other channels, repeat steps 2 to
4.
ON
P001
MENU –/+
BACK
MENU
SEARCH
VHF H
P001
STOP
OFF
P002
ADJUST –/+
BACK
MENU
OFF
P002
ADJUST –/+
BACK
MENU
Hide quick links:
Advertisement
Table of Contents
