Connecting the Equipment
The following procedure describes how to attach the Cisco SPA500DS to
a Cisco SPA500 Series IP Phone.
Turn both the Cisco SPA500 Series IP Phone and the Cisco
SPA500DS face down.
Align the screw hole in the CiscoSPA500 Series IP Phone with one
of the holes on the attachment arm.
Insert the pegs on the attachment arm into the peg holes as shown
below on the Cisco SPA500 Series IP Phone.
Using an attachment arm screw, secure the attachment arm to the
Cisco SPA500 Series IP Phone.
Align the right screw hole in the Cisco SPA500DS with the unused
hole on the attachment arm.