Korg The iS40 Manual page 22

Selecting Keyboard Sets:
1. Repeatedly press the BANK button in the KEYBOARD SET section, until you see the
A-bank LED light.
2. Now press KEYBOARD SET NUMBER button 1. Play the keyboard to hear the
selected set.
Storing a new Keyboard Set:
1. Select Arrangement "A13 L.A. R&B".
2. Press the LOWER button in the KEYBOARD ASSIGN section.
3. Press the LOW/UPP2 button in the VOLUME section.
4. In the PROGRAM section, press BANK F, followed by NUMBER 8, then 1, to select
Program "F81 AmbassFret". Play in the lower range of the keyboard to hear the
selected program.
5. Press the OCTAVE [-] button once, to transpose the bass down an octave.
6. Press the PAGE+ button twice, to move to PAGE3. On this page you can adjust pan
and effect send levels for the selected track.
7. Press the CURSOR> button to move and set both the C and D effect send levels to
a value of "0", so that the bass track has no effect processing.
8. Play in both ranges of the keyboard - you've created a Piano/Bass split. Adjust the
volumes of the LOWER and UPPER tracks by pressing the appropriate buttons in
the VOLUME section.
Now to write the new Keyboard set:
9. Press and Hold the REC/WRITE button.
10. In the KEYBOARD SET section, repeatedly press the BANK button and watch the
Display, until you see Bank "B". Press KEYBOARD SET NUMBER "5" to select
BANK "B5".
11. Release the REC/WRITE button, then press the ENTER/YES button twice, to WRITE
your new Keyboard Set into memory.
12. Now re-select Arrangement "A13 L.A. R&B". Note that the original track
assignments are recalled, but when playing this arrangement, or any other
23
Korg iS40 Guide