Download Print this page

Troubleshooting; Service Information; Full Two-Year Home Use Warranty - Black & Decker BD200TMT Instruction Manual

Oscillating multi-tool
Hide thumbs

Advertisement

Table of Contents
Problem
• Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are listed on page 12 and 13 and
are available from your local dealer or authorized service center. In addition to Black &
®
Decker
accessories, your oscillating tool will also accept Porter Cable
®
FatMax
oscillating tool accessories. If you need assistance regarding accessories,
please call: 1-800-544-6986.
WARNINg:
The use of any accessory not recommended for use with this tool could
be hazardous.

Service Information

All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com

full Two-year home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects
in material or workmanship. The defective product will be replaced or repaired at no
charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns
should be made within the time period of the retailer's policy for exchanges (usually 30
to 90 days after the sale). Proof of purchase may be required. Please check with the
retailer for their specific return policy regarding returns that are beyond the time set for
exchanges.

Troubleshooting

Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
10
Possible Solution
• Plug tool into a working
outlet.
• Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product
repeatedly causes the
circuit breaker to trip,
discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at a Black &
Decker service center or
authorized servicer.)
®
and Stanley

Advertisement

Table of Contents
loading

  Also See for Black & Decker BD200TMT

This manual is also suitable for:

Bd200mt type 2