Korg CX-3 Owner's Manual page 22

Parameters
EX Mode Drawbar Level
This parameter is displayed in EX Edit mode.
Drawbar 1
EX Drawbar and EX Percussion of Drawbar 2
Specify the level for the EX Drawbar and EX Percus-
sion of Drawbar 1 and Drawbar 2.
From the left, the display shows the level of the 16', 5-
1/3', 8', 4', 2-2/3', 2', 1-3/5', 1-1/3', and 1' bars.
When a bar is pulled out all the way, its level will be 8.
In EX mode, pressing the [DISPLAY] key once when
the program name is displayed will show the Draw-
bar 1 and EX Drawbar levels that you specified here.
Then pressing the [DISPLAY] key once again will
show the EX Percussion levels you specified here.
The front panel Drawbar 1 or Drawbar 2 settings can
be copied instantly to the parameters of a program.
For details refer to "Copying drawbar parameters"
(p.14).
EX Drawbar Type
This parameter is displayed in EX Edit mode.
This specifies the type of sounds that are assigned to
the EX Drawbars of Drawbar 2. When you select the
type here, the sounds specified by the Global mode
Group 8 "Type 1 Ex Drawbar" through "Type 4 Ex
Drawbar 4" parameters (p.26) will be assigned to the
four drawbars.
DB Preset's Perc (Drawbar Preset Percussion)
This parameter is displayed in Normal Edit mode.
This specifies whether the various keys of the PER-
CUSSION section can be used when the UPPER
[DRAWBAR PRESET] key is selected.
Dis (Disable): The keys of the PERCUSSION section
will not function.
Ena (Enable): The keys of the PERCUSSION section
will function.
In Normal mode when the program name is dis-
played, you can press the [DISPLAY] key once to
check this setting. If the setting is Ena, the Percussion
icon will be shown at the left of the UPPER display.
18
[0...8]
Group 3
Perc Nrml Level (Percussion Normal Level)
This sets the volume of the percussion when the
[SOFT] key of the PERCUSSION section is at the
normal setting (key LED dark).
Perc Soft Offset (Percussion Soft Level Offset) [0...99]
This sets the volume of the percussion when the
[SOFT] key of the PERCUSSION section is at the soft
setting (key LED lit). This setting determines how
much the volume will be lowered from the value
specified by the "Perc Nrml Level" parameter.
Perc Nrml Level
Perc Soft Offset
Normal Perc DB ATT (Normal Percussion Drawbar
[1...4]
Attenuation)
This sets the volume of the sound created by the
drawbars when the [SOFT] key of the PERCUSSION
section is at the normal setting (key LED dark). This
setting will determine how much the volume is
lowered from the volume specified by the Drawbar 2
bars or by the "UPPER" parameters.
Perc Fast Decay (Percussion Fast Decay)
This sets the decay speed when the [FAST] key of the
[Dis, Ena]
PERCUSSION section is at the fast setting (key LED
lit).
Perc Slow Offset (Percussion Slow Offset)
This sets the decay speed when the [FAST] key of the
PERCUSSION section is at the slow setting (key LED
dark). This setting will determine how much the
speed is slowed from the value specified by the "Perc
Fast Decay" parameter.
[0...99]
Note-on
Note-off
Normal
Soft
[0...99]
[0...99]
[0...99]