Example Of Connection To A Guitar Amp (Or Amps) - Korg ToneWorks AX3000G Owner's Manual

NOTE: If you want to use headphones, plug them into the PHONES jack. If you do,
signal from the OUTPUT jack(s) will no longer be heard.
2. Turn the LEVEL knob located on the rear panel of AX3000G all the way toward
the left (as seen from the rear), setting the volume to 0.
3. Plug your guitar into the rear panel INPUT jack.
4. Connect the included AC adapter to the rear panel DC9V power supply jack,
and then connect the plug to an AC outlet.
5. To adjust the volume, turn up your amp or mixer and the AX3000G's rear panel
LEVEL knob to a desired level.
NOTE: Use the GLOBAL menu setting "DOUT LVL" to adjust the S/P DIF OUT out-
put level.
Guitar
E
XAMPLE OF CONNECTION TO A GUITAR AMP
• If you want to connect the AX3000G to your guitar amps, connect the OUTPUT
L/MONO and R jacks to the inputs of your amps. Be sure to select the appropri-
ate connection (p.12).
HINT: If you're connecting the AX3000G directly before your combo amp or head,
set the rear panel LEVEL knob to the maximum position.
Guitar
Monaural phone jack
INPUT
to your mixer/recorder
External effect processor
or guitar amp
LINE/AMP
Monaural phone
jack INPUT
INPUT
SEND RETURN
AX3000G
OUTPUT
L/MONO R
AX3000G
13
Headphones
to your MIDI
sequencer/computer
OUTPUT
L/MONO R PHONES
( )
OR AMPS
INPUT
Monaural
phone jack
Guitar amp(s)
INPUT
Monaural
phone jack