Adjusting The Input Level - Korg MR-2000S Owner's Manual

2. Use the dial to select the Project Type, and press the enter button to confirm.
A check mark will appear in the check box for the project type you selected and confirmed.
You can choose from WAV (BWF), DFF, DSF, and WSD. For details on each type, please refer to "Project
recording format (New Project Type)" (p.28).
If you've selected WAV
3. If you checked WAV (BWF), use the dial to select the desired Wav Format: fs/bit setting (bit depth
and sampling frequency), and press the enter button confirm.
If you check DFF, DSF, or WSD, use the dial to select the sampling frequency in the 1-bit DSD Format:
Fs setting, and press the enter button to confirm.
4. When you've finished setting, press the exit button to return to the menu list screen, and then press
the menu button once again to return to the home screen.

Adjusting the input level

Press the record button (the record LED will blink), and adjust the input level while in record-ready mode.
When using digital input (input source: S/P DIF)
There's no need to adjust the input level.
When using analog input (input source: RCA, XLR)
You can adjust the input level in steps of 0.25 dB. The range will depend on the input source and the ref-
erence level.
Input source
Reference level
Setting range (dB)
If you want to change the nominal level (reference level) of the balanced inputs and outputs, please
refer to "Analog reference level setting (Reference Level)" on page 29.
1. Press the menu button, use the dial to select "INPUT LEVEL" from the menu list, and press the
enter button to confirm.
The Input Level screen will appear.
2. Use the dial to select the input level link setting, and press the enter button to confirm.
LR Link: Turning the dial will increase or decrease both input levels simultaneously. Use the dial to
select a gain value that does not make the level exceed the "0" marking in the level meter,
and then press the enter button to confirm.
Indivi.: The level can be adjusted independently for left and right. Proceed to step 3.
3. Turn the dial to select InL Gain (or InR Gain), and press the enter button to confirm.
The selection icon will change from " " to " ", and the gain value will be highlighted.
14
If you've selected DFF, WSD, DSF
or
RCA
No setting – 12 dB
– 60...21 – 60...19
XLR
– 14 dB – 16 dB
– 60...21 – 60...23
Input level screen
– 18 dB – 20 dB
– 60...25 – 60...27