Getting Started - JVC KD-R757 Instruction Manual

GETTING STARTED

1
Cancel the demonstration
1 Press and hold MENU.
2 Turn the volume knob to select [DEMO], then press the knob.
3
Turn the volume knob to select [DEMO OFF], then press the knob.
4
Press MENU to exit.
2
Set the clock
1
Press and hold MENU.
2 Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK SET], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [24H/ 12H], then press the knob.
6
Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the
knob.
7 Press MENU to exit.
3
Set the basic settings
1 Press and hold MENU.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
4
CLOCK
CLOCK ADJ AUTO: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Data System signal. ; OFF: Cancels.
CLOCK DISP ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
SETTINGS
BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SRC SELECT
AM *
ON: Enables AM in source selection. ; OFF: Disables.
AUX * ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select
when the KS-BTA100 Bluetooth adapter is connected to the auxiliary input
jack ( 9). The source name will change to BT AUDIO.
LANGUAGE Selects the display language for menu and Tag information (folder name,
file name, song title, artist name, album name) if applicable.
ENGLISH: Display language is English.
РУССКИЙ: Display language is Russian.
Default: KD-R751 / KD-R651 / KD-R551 / KD-R453 / KD-R452 /
KD-R451: ENGLISH
KD-R757 / KD-R557 / KD-R457: РУССКИЙ
F/W UPDATE
SYSTEM
F/W xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
Default: XX