Removing A P2 Card; Write-Protecting A P2 Card - Panasonic AJ-PCD2G Operating Instructions Manual

Removing a P2 Card

1
Flip up the EJECT button in the
direction of the arrow.
2
Press the EJECT button.
The P2 card will slide out far enough to
allow you to remove it.
◆ NOTE:
• To remove a P2 card on a Macintosh, drag the P2 card icon to the Trash. Then
check that the icon has disappeared and the access indicator on the P2 drive
has turned off before physically removing the P2 card.
• Do not remove a P2 card that is being accessed. Removing a P2 card during
access may cause the P2 drive to malfunction. Should this happen, reconnect
the two USB cables.

Write-protecting a P2 Card

P2 cards come equipped with a write-
protect switch. Slide this switch to the
"PROTECT" side to prevent overwriting
and deletion of data.
Note that the write-protect switch will not
work on a card that is inserted in the drive.
In order for the drive to recognize the
switch setting, remove the P2 card from
the drive, set the switch and reinsert the
card in the drive.
E-11
EJECT button EJECT button
P2 card P2 card
PROTECT PROTECT