Stapling And Hole Punching - Konica Minolta BIZHUB C252 Quick Manual

Various Printing Methods

Stapling and Hole Punching

Documents can be stapled together or holes can be punched into the docu-
ment.
By specifying the file margin, you can specify the margin for stapling or hole
punching.
ABCD
Note
The staple function is available only when optional finisher FS-514, FS-
501, or FS-603 is installed.
The hole punch function is available only when optional finisher FS-514
and punch kit PK-510 are installed, or when optional finisher FS-603 and
punch kit PK-501 are installed.
The number of staples that can be selected may vary depending on the
finisher that is installed. When optional finisher FS-501 is installed, spec-
ify "1 staple". When optional finisher FS-514 or FS-603 is installed, spec-
ify "1 staple" or "2 staples".
Operating System
Windows
Mac OS X
Mac OS 9.2
C252
Stapling
ABCDEF
Printer Driver
Konica Minolta PCL
Konica Minolta PostScript
PostScript PPD
PostScript PPD
Hole punching
ABCD
ABCDEF
Refer to
"Specifying the Setup Tab Settings" on the
User's Guide [Print Operations]
"Specifying the Layout Tab Settings" on the
User's Guide [Print Operations]
"Specifying the Device Options Tab
Settings" on the User's Guide [Print
Operations]
"Finishing" on the User's Guide [Print
Operations]
"Printer Specific Options (Finishing Options
1 to 4)" on the User's Guide [Print
Operations]
4
4-15