Installing The Printer Driver Using Plug And Play; For Windows 98Se - Konica Minolta BIZHUB C252 Quick Manual

Installing the Printer Driver
14
When installation is complete, make sure that the icon of the installed
printer appears in the Printers window.
15
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.

Installing the Printer Driver Using Plug and Play

For Windows 98SE

1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
– Konica Minolta PCL Driver: User Software CD-ROM
– Konica Minolta PostScript Driver: PostScript Printer Driver CD-
ROM
3
Turn the main power of this machine on.
The Add New Hardware Wizard starts up.
4
Click the [Next] button.
5
Select "Search for the best driver for your device (Recommended)",
and then click the [Next] button.
6
Select "Specify a location", and then click the [Browse] button.
7
Specify the folder on the CD-ROM that contains the printer driver for
the operating system that you are using, and then click the [OK] button.
– Konica Minolta PCL Driver: User Software CD-ROM
"Driver\bizhubC252_C252P" folder
– PostScript PPD driver: PostScript Printer Driver CD-ROM
"Driver\PS-PPD" folder
8
Click the [Next] button, and then follow the on-screen instructions.
If using a parallel connection, proceed to step 10.
9
The Add New Hardware Wizard dialog box appears again. Repeat
steps 4 through 8.
C252
2
2-11