On the back of the camera is a small rubber flap. Pull this down to reveal the USB jack and the micro memory
•
card slot.
Insert a micro memory card into the slot. Be sure the gold leads are facing up.
•
Be sure that the memory card clicks into place. You may need to use your fingernail to push it in far
enough to lock it into place.
Once your battery has been charged and a micro memory card inserted, turn on your camera by pushing, but not holding, the power button.
•
You will hear a beep sound and see the green LED light up, quickly followed by the red.
•
That's it! You have begun shooting video!
•
To stop filming, push and hold down the power button again. You will hear a lower beep sound and the red LED will turn off.
•
Change recording modes from Video to Photo (Time-Lapse) by sliding the switch on the left to the desired position.
•
Recording Video
Video - Photo Switch
Video
PDFmyURL.com
Need help?
Do you have a question about the OPS and is the answer not in the manual?
Questions and answers